Table of Contents
Advertisement
Active Control
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
& Press the h key on the remote control.
é The Active Control menu appears.
" Press the cursor up/down to select the Active
Control values
Off
(recommended) or
The picture settings are being optimised
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
Note: When having connected a monitor without a
light sensor, the values are On and Off.
' Press the cursor right to select
Sound menu
Sound
TV
Smart sound
Volume
Treble
Bass
Balance
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Digital/Analogue)
Smart sound
Select
Smart sound
sound settings, each corresponding with specific
factory settings of Treble and Bass.
refers to the personal preference settings
Personal
of sound in the sound menu.
Note: Disabled when a VGA source is being displayed.
Volume
This will adjust the sound output level.
Treble
This will adjust the level of high frequency content in
the sound.
Bass
This will adjust the level of low frequency content in
the sound.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
,
,
Minimum
Medium
.
Maximum
Smart Picture
Press the cursor right to select
Select the menu items in the Sound menu with the cursor up/down and
adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels when the
bar scale is centered.
Note:
- In case of a Cinema Link configuration and the Cinema Link is activated,
the menu function Surround mode is steered by the audio receiver instead
of by the receiver box. See the separate Cinema Link booklet supplied.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo transmission.
- Digital/Analogue is only selectable in case of Digital transmission.
- In case you connect your TV receiver box with a speakerless monitor and
without having connected an audio receiver, all references made to sound
reproduction, volume control and audio connections are not applicable.
to display a list of predefined
( Press the cursor up/down to select one of
the predefined picture settings.
§ Press the cursor right to select
è Press the cursor up/down to select
one of the Dual screen demos or
When you select Dynamic contrast, Pixel Plus,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
! Press the h key again to switch off the
Active Control menu.
.
.
Sound
Headphone volume
This controls the level of sound through the
headphones.
Surround mode
This selects the modes for more spatial or surround
sound reproduction.
(Dual I-II)
This will select, per channel, Language I or Language II,
when dual sound transmission is available.
(Mono/Stereo)
This selects, per TV channel, mono or stereo sound
when analogue stereo broadcasts are available.
(Digital/Analogue)
This selects, per TV channel, Digital or Analogue
sound when digital sound broadcasts are available.
Active Display
.
Show bars
.
Off
11 11
Advertisement
Table of Contents
