Adjusting Volume; Ringer Volume; Speakerphone Volume; Handset Volume - Panasonic UF-E1 User Manual

Adjusting Volume

You can adjust the ringer volume, speakerphone volume and handset volume on your apparatus. The built-
in speaker enables you to hear the dialling tone, dialling signals, and busy tone. The ringer will sound when
your apparatus receives a call.
Handset
SPEAKER-
PHONE
(See note1) (See note2) (See note3)
1. When "SILENT RCV" in BASIC SETTING is set to "ON", the apparatus will not trigger ringing
NOTE
sound. (See pages 81 and 82)
2. You can also adjust the volume of the key touch tone in BASIC SETTING ("KEY VOLUME").
(See pages 81 and 82)
3. If you select volume "0", the display will show the following message when a call comes in

Ringer Volume

4 levels (0, 1, 2 or 3) can be set.
(See notes 1 and 3)
use [ ] and [ ] to adjust during standby mode.

Speakerphone Volume

VOL.
4 levels (1, 2, 3 or 4) can be set.
SPEAKER-
PHONE
and
SPEAKER-
PHONE
to return to standby.

Handset Volume

4 levels (1, 2, 3 or 4) can be set.
Lift up the handset.
When you are calling,
use [ ] and [ ] to adjust.
RINGER VOLUME =2
(use [ ] and [ ] to adjust.)
MONITOR VOLUME=2
RECEIVER VOL = 2
PICKUP TELEPHONE
.
17