Chorus And Chorus 2; Choru And Choru - LinPlug Albino 3 Manual

Chorus and Chorus 2

The Chorus effect can be used to "thicken" a single sound creating the
impression that it contains multiple voices. The Chorus works by mixing
delayed signals with the original signal. The Albino's Chorus features
controls for "Wet", "Time", "Rate", "Inv", "Spread", "Spread Time" and
"Spread Rate".
The Wet dial allows you to set the balance between the processed "wet"
signal and the original unprocessed "dry" signal.
The Time dial is used for setting the delay time (in milliseconds). Longer
times produce a "chorusing" effect while shorter times create a "flanging"
effect.
The Rate dial sets the rate at which the signal is modulated.
The Inv (Invert) button allows you to invert the signal that is used to create
the chorus effect. This is particularly useful when creating flanged sounds
with shorter delay times (0.25 ms and below).
A unique feature of the Albino Chorus is its Spread parameter which is
turned on or off using the Spread button. Basically, "Spread" makes the
chorus sound fatter by adding random deviations to the Time and Rate
parameters. The degree of "randomness" depends on the spread Time and
Rob Papen Albino 3.0 45