Effects - LinPlug Albino 3 Manual

Effects

The Albino 3 has four independent stereo effects units: Effect 1, Effect 2,
Effect 3 and Effect 4. All four effects units are identical.
Each effects unit contains twelve modules: Delay, Chorus, Chorus 2,
Phaser, Flanger, Filter, Reverb, Stereo Delay ("StDelay"), Gator, Wah
Wah, Compressor and LoFi. All effects modules can be set to either "On"
or "Thru" using the button to the right of the effect type menu, or by using
the four buttons to the left of the Effects section.Only one effects unit is
displayed at a time. To switch between the four effects units, click on the
buttons labelled "1", "2", "3" and "4" to the left of the effects section. To
change the effect type click on the menu to the right of the Effect label.
Each effects unit can also be routed to the following effects unit or directly
to the instrument's output.
Each effect's controls differ. All effects are described in detail below.
Hint: Even if a preset does not use effects most often the effects are
programmed to add a useful effect to the sound when switched on. So
switch on the effects units to see how the processing changes the sound.
Rob Papen Albino 3.0 43