Table of Contents
Advertisement
To adjust the temperature to a higher or lower setting, press
the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current
setting you entered. Each press of the button after that
changes the setting by one degree.
The display shows your new setting momentarily, then
changes back to the current temperature.
CHOOSING FAHRENHEIT OR CENTIGRADE
Depending on which temperature standard you prefer to use,
you can set your control panel to display in fahrenheit or
centigrade. To change between fahrenheit and centigrade,
press the Mode button (located between the two digital
temperature displays).
Press to alternate between
Fahrenheit and Centigrade
Temperature Adjustment Guide
TEMPERATURE CONTROLS
If Fresh Food compartment is too warm
If Fresh Food compartment is too cold
If Freezer compartment is too warm
If Freezer compartment is too cold
MAKING TEMPERATURE ADJUSTMENTS
After running your refrigerator for 24 hours, you can adjust
temperatures as needed. Make your adjustments small and
gradual, allowing time for temperatures to change and
stabilize. Refer to the following guidelines for temperature
settings.
WHAT TO DO IF THE TEMPERATURE DISPLAYS
FLASH
If either display is continuously flashing, it may indicate that the
control system has detected a performance problem. Call your
Electrolux service representative, who can interpret the
flashing message.
Numeric Display
Warmest
Factory Setting
Coldest
Temperature Display (2-Digit)
Warmest
Factory Setting
Coldest
Adjust Fresh Food control one degree
colder by pressing Down (Colder) button.
Adjust Fresh Food control one degree
warmer by pressing the Up (Cold) button.
Adjust Freezer control one degree colder
by pressing Down (Colder) button.
Adjust Freezer control one degree warmer
by pressing the Up (Cold) button.
8
Fresh
Freezer
Food
1
1
6
6
9
9
Freezer
Fresh Food
F°
C°
F°
C°
6°
-14°
47°
8°
0°
-18°
37°
3°
-6°
-21°
33°
1°
Advertisement
Table of Contents
