Replacing Light Bulbs - Frigidaire Elements 241721000 Use & Care Manual

CAUTION CAUTION CAUTION
CAUTION CAUTION
Wear gloves when replacing light bulbs to avoid getting
cut.

REPLACING LIGHT BULBS

1. Unplug refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Remove light cover, if necessary.
4. Unscrew and replace old bulb with an appliance bulb of
the same wattage.
5. Replace light cover, if necessary.
6. Remember to plug the refrigerator back in.
Crisper Light Replacement (Models may vary)
Short
Vacations
Long
Vacations
Moving
IMPOR IMPOR IMPORT T T T T ANT IMPOR IMPOR ANT ANT ANT ANT
If the refrigerator is going to be stored or moved in freezing temperatures, the water in the ice and water
system must be drained completely. Failure to do so could result in water leaks when the refrigerator is put
back into service. Contact a service representative to perform this operation.
CARE & CLEANING
Light Socket
Located Behind
Left Rear
of Crispers
or
Vacation and Moving Tips
•
Leave refrigerator operating during vacations of 3 weeks or less.
•
Use all perishable items from refrigerator compartment.
•
Turn automatic ice maker off and empty ice bucket, even if you will only be gone for a
few days.
•
Remove all food and ice if you will be gone one month or more.
•
Turn off automatic ice maker and turn water supply valve to closed position.
•
The On/Off button on the Electronic Control only controls your refrigerator's cooling
system. To turn off power to your refrigerator you must unplug the power cord from the
wall outlet.
•
Clean interior thoroughly.
•
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
•
Remove all food and ice.
•
If using handcart, load from side.
•
Adjust rollers all the way up to protect them during sliding or moving.
•
Pad cabinet to avoid scratching surface.
(CONTINUED)
Refrigerator Light Replacement
Crisper Light
Cover
Light Bulb
21
Freezer Light Replacement