Raid Configuration - Abit AN9 32X User Manual

RAID Configuration:

Click <Enter> key to enter its submenu:
RAID Function
X - Serial-ATA 1 RAID
X - Serial-ATA 2 RAID
X - Serial-ATA 3 RAID
X - Serial-ATA 4 RAID
X - Serial-ATA 5 RAID
X - Serial-ATA 6 RAID
X - OnChip SATA Boot ROM
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
RAID Function
This item allows you to enable or disable the RAID function for Serial-ATA 1~6 ports.
- Serial-ATA 1 RAID ~ Serial-ATA 6 RAID
This item allows you to enable or disable the RAID function for each of the Serial-ATA 1~6 port
individually.
- OnChip SATA Boot ROM
This item allows you to use the boot ROM of OnChip SATA to boot up system.
Back to Integrated Peripherals Setup Menu:
Init Display First
This item selects which display slot to initialize first when the system boots.
OnChip USB
Select the type of USB controller. Three options are available: Disabled
The default setting is V1.1+V2.0. If you choose to disable this item, the "USB Keyboard
Support" and "USB Mouse Support" items will not be available to select in Integrated
Peripherals menu.
AN9 32X
Phoenix – Award BIOS CMOS Setup Utility
RAID Configuration
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
V1.1+V2.0 V1.1.
3-19