Ide Function Setup - Abit AN9 32X User Manual

IDE Function Setup:

Click <Enter> key to enter its submenu:
IDE 1 Controller
IDE DMA transfer access
IDE HDD Block Mode
Serial-ATA Controller
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
IDE 1 Controller
This item allows you to enable or disable the IDE1 controller.
IDE DMA transfer access:
This item selects the DMA mode for devices connected through IDE channels.
IDE HDD Block Mode
This item enables or disables the IDE HDD Block Mode.
Serial-ATA Controller
This item enables or disables the on-chip SATA controller.
3-18
Phoenix – Award BIOS CMOS Setup Utility
IDE Function Setup
F6: Fail-Safe Defaults
Enabled
Enabled
Enabled
All Enabled
Item Help
F7: Optimized Defaults
AN9 32X