Gigabyte GA-D425TUD User Manual page 32

CPU Multi-Threading
Allows you to determine whether to enable all CPU cores and multi-threading function when using an
Intel CPU that supports multi-core technology. This feature only works for operating systems that support
multi-processor mode.
Enabled Enables all CPU cores and multi-threading capability. (Default)
Disabled Enables only one CPU core.
Limit CPUID Max. to 3
Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows
XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0.
(Default: Disabled)
Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The ad-
justable range is from 0 to 15 seconds. (Default: 0)
Backup BIOS Image to HDD
Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image file. (Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card.
PCI Sets the PCI graphics card as the first display. (Default)
Onboard Sets the onboard graphics as the first display.
On-Chip Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are:8MB+1 for GTT (default),
1MB+1 for GTT.
BIOS Setup - 32 -