Product Specifications - Gigabyte GA-D425TUD User Manual

1-2

Product Specifications

CPU Built in with an Intel
Š
processor (1.8 GHz)
1M L2 cache
Š
Chipset Intel
Š
Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory
Š
Support for DDR3 800 MHz memory modules
Š
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Audio Realtek ALC887 codec
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
LAN Realtek GbE LAN Chip (10/100/1000 Mbit)
Š
Expansion Slots 1 x PCI slot
Š
Storage Interface Chipset:
Š
-
GIGABYTE SATA2/JMicron JMB363 chip:
Š
-
-
-
USB Chipset:
Š
-
Internal 1 x 20-pin ATX main power connector
Š
Connectors 1 x 4-pin ATX 12V power connector
Š
1 x IDE connector
Š
4 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
1 x system fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
Only for GA-D525TUD.
j
Only for GA-D425TUD.
k
Hardware Installation
Dual-core Atom™ D525j/ Intel
®
* Do not disassemble the onboard CPU/chipset and the heatsinks/fan by yourself to
avoid damage to these components.
j/512K L2 cachek
NM10
®
* Due to Windows 32-bit operating system limitation, when the 4 GB of physical memory
is installed, the actual memory size displayed will be less than 4 GB.
* To enable 7.1-channel audio, you have to use an HD front panel audio module and
enable the multi-channel audio feature through the audio driver.
2 x SATA 3Gb/s connectors (SATA2_0, SATA2_1) supporting up to 2 SATA
3Gb/s devices
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2
SATA 3Gb/s devices
* W hen installing Windows XP onto the hard drive connected to the JMicron JMB363
controller, be sure to connect the optical drive to a SATA port controlled by the Intel
chipset.
Support for SATA RAID 0, RAID 1, and JBOD
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
- 10 -
Single-core Atom™ D425k
®