Gigabyte nForce series Configuration page 9

Step 4:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 13 below will appear.
Figure 13
Step 5:
Insert an empty floppy disk and press E to select E)nVIDIA Series ATA(XP) if you want to install Windows
XP; press F to select F)nVIDIA Series ATA(2K) if you want to install Windows 2000. Then it will take
about one minute to copy the SATA driver from the motherboard driver CD to the floppy disk.
Step 6:
Press 0 to exit when the procedure is complete (Figure 14). You have copied the SATA driver successfully.
Figure 14
- 9 - SATA Hard Drive Configurations (nForce series)