Gigabyte G-MAX Micro ATX Series User Manual page 6

Hide thumbs Also See for G-MAX Micro ATX Series:



CPU (For Intel

Tualatin processors)

In this section you will find the gist of CPU installation.

CPU Pin

1.Insert the CPU on the CPU socket. Before installation, lift up the lever and align the

cut of the CPU with the marking on the socket.

2.Pull down the lever to lock the CPU on the socket after installation. Put CPU cooler

on retention module and make sure to keep the heat sink tight against the CPU to

obtain the best cooling result. Lock the cooler on retention module.

3. Apply the thermal compound to one side of the template, and ensure the compound

is spread evenly across the template and repeat if necessary.

4. Connect fan power connector to the CPU FAN connector on the motherboard.

Set CPU clock frequency from BIOS Setup, see Motherboard Manual for details.

For AMD Athlon

and AMD Duron



to Intel

Pentium

Click fan lock on

the pin at sides of

CPU socket.

processors, the installation method will be similar



and Intel

Celeron

P. E6

G-MAX

Micro ATX Series User's Manual

Lever

Install fan on top of CPU

processors