Gigabyte G-MAX Micro ATX Series User Manual page 8

Hide thumbs Also See for G-MAX Micro ATX Series:

G-MAX

Micro ATX Series User's Manual

Hard Drive Installation

1.Remove 3 screws in front of the hard drive chassis and dismount chassis.

2.The chassis accommodates up to three 3.5" storage devices. Select a place and fix

the hard drive with screws.

3.5"Floppy

Drive

Hard drives

3.Connect the IDE cable included in the accessory box to the connector on the hard

drive. Make sure that the RED wire on the ribbon connects to PIN 1 of the hard drive.

Connect to

hard drive

4.Connect power connector to the hard drive.

P. E8