Using A Usb Connection; And 2000 Only) - Epson Stylus Pro 7500 Startup Manual

2. Plug the cable connector securely into the printer's interface.
Then squeeze the wire clips together until they lock into place
on both sides. If your cable has a ground wire, connect it to
the ground connector beside the interface connector.
3. Plug the other end of the cable into the computer's parallel
port. If there is a ground wire at the computer end of the cable,
connect it to the ground connector at the back of the computer.
Now see "Installing the Printer Software" on page 1-8. You must
install the printer software before using your printer.
Using a USB connection (For Windows 98, Me,

and 2000 only)

To connect the printer to a USB port, you need a standard shielded
USB cable. Follow the steps below to connect the printer to your
computer.
Setting up the Printer with Your Computer
1
1-3