Epson Stylus Pro 7500 Startup Manual page 20

Note:
The EPSON Printer Port and DMA transfer features (For
Windows 95 and 98 only) of the EPSON printer driver you installed
are not available with USB connection. They are available only with
the parallel interface connection. For information on the EPSON
Printer Port and DMA transfer, see the Online Guide.
You need to select COMPAT in the PARA. I/F setting of SelecType
mode. For details, see "SelecType Settings" in the Online Guide.
1. Make sure both the printer and computer are turned off.
2. Plug the appropriate end of the cable into the USB port on the
back of the printer. (The end that fits the printer has a different
shape from the end that fits the computer.)
3. Connect the other end of the cable to the computer's USB port.
Now see "Installing the Printer Software" on page 1-8. You must
install the printer software before using your printer.
1-4
Setting up the Printer with Your Computer