Epson LQ-2080 User Manual page 67

5. Slide the left sprocket to the left margin of the paper using the
scale on the paper guide as a guide. (Printing starts at the
arrow mark.) Then push the lever back to lock it in place.
Note:
See "Paper alignment" and "Printable area" in Appendix C for
more information on the left margin position.
6. Slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper support midway between the
two sprockets as shown above. Then open both sprocket
covers.
7. Make sure your paper has a clean, straight edge.
Printing on Continuous Paper
2
2-23