Table of Contents
Advertisement
Using advanced features
Preferences
Press [SETUP] button and select
1
1
"PREFERENCES".
Select "OSD display".
2
2
OSD display "ON" or "OFF" mode will toggle by
pressing [ ] button.
Select "Auto Power off".
3
3
Auto Power Off "YES" or "NO" mode will toggle
by pressing [ ] button.
If the Auto Power off mode is selected during
playback, the VCR will auto-rewind the tape to
the start point and turn off the power at the
end point of the tape. The tape will be ejected.
Select "Channel Change".
4
4
Channel change "3" or "4" mode will toggle by
pressing [ ] button.
26
Searching a cassette tape for programs (indexing)
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
PREFERENCES
FUNCTIONS
overlap, the index
SELECT LANGUAGE
Move:
Select:
ENTER
mark for the second
End:
SETUP
program will be
erased. Therefore,
when you use the
PREFERENCES
index feature to find
OSD display
ON
the second program,
Auto Power off
YES
the VCR will skip
Channel Change
CH3
over it.
• If you record
multiple programs
Move:
Select:
ENTER
End:
in one recording
SETUP
session, the VCR will
only find the index
mark that was
PREFERENCES
placed on the video
OSD display
ON
cassette tape when
Auto Power off
YES
Channel Change
CH3
the recording
session began.
Move:
Select:
ENTER
End:
SETUP
PREFERENCES
OSD display
ON
Auto Power off
YES
Channel Change
CH3
Move:
Select:
ENTER
End:
SETUP
Searching with the tape counter (go- to search)
be missed by the VCR :
• A mark too close to
your location on the
tape.
• The mark at the
beginning of a
recorded segment of
five minutes or less.
• The first index mark
on the tape when
you start at the
beginning of the
tape.
When you record a programs, the VCR places an index mark at the start of the recording. To search for an
index mark:
Press [SETUP] button and select
1
1
• If two
"FUNCTIONS".
recordings
Select "Index Search".
2
2
If you want to search through a certain number
3
3
of index marks, press two number buttons to
enter the number of marks you want to search.
Press CLEAR on the remote to correct an entry.
or
Press REW to search backward or FF to search
forward. The VCR will locate your index mark
and begin playback. If you did not enter a
specific index number, the VCR will locate the
next index mark and begin playback. Press STOP
to stop index searching.
You can mark a segment of the video cassette with the tape counter that will help you easily locate the
segment later.
Some index
Press [SETUP] button and select
1
1
marks that may
"FUNCTIONS".
Select "Go-To Search".
The tape counter is displayed on the screen.
2
2
Input the tape counter you want to go and
press REW or FF, the VCR will search for the
time counter you want.
Using advanced features
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
PREFERENCES
FUNCTIONS
SELECT LANGUAGE
Move:
Select:
ENTER
End:
SETUP
FUNCTIONS
Index Search
Go-To Search
Tape Select
Auto Repeat
Move:
Select:
ENTER
End:
SETUP
INDEX SEARCH
Press REW or FF
to begin searching
or
Enter a specific
index number
01
End:
SETUP
FUNCTIONS
Index Search
Go-To Search
Tape Select
Auto Repeat
GO-TO SEARCH
Current tape counter is
2 : 17 : 18
Press REW or FF
to go to - : - - : 00
27
Advertisement
Table of Contents
