Table of Contents
Advertisement
Automatic clock setting and correction
Even though you turn the TV off with MAIN POWER (ON/OFF) button, if you
select a programme of your country which has Teletext or PDC transmission,
clock will be set and corrected automatically.
This function is only available for the countries as follows:
Deutschland, Great Britain, France, Italy, Sweden,
Switzerland, Netherlands, Ireland
SETTING THE WAKE UP TIME / PROGRAMME
• Confirm the Clock is set.
Wake up time is only available when Clock is set
• Select the Wake up to "YES".
The Wake up time and Wake up prog. will be displayed.
• Set Wake up time and prog. in a same way to the above for Clock.
The set will switch on to this time and programme number.
Note that the Wake up time is not operate in Childlock mode.
SLEEP
By pressing the SLEEP (
following setting:
00:20 -> 00:40 -> 01:00 -> 01:20 -> 01:40 -> 02:00
The set will turn off after time you select.
Automatic Switch-Off in No Broadcast Signal
If a broadcast signal is not present for about 30 minutes, the set will be auto-
matically turned off.
In AV mode, however, this function does not operate.
You can prevent the use of the TV set without the remote control.
The set is child-locked after switching off the set by pressing the R, G, Y, C,
the POWER button (
) in sequence on the remote control within 5 sec-
ond. The child-lock function is indicated by flashing the INDICATOR on the
front of set.
The set can only be switched back on using the remote control.
ASPECT CONTROL
Whenever the Zoom button is pressed, the screen will be changed as shown :
4:3 -> 16:9 -> zoom -> waterglass ->
In zoom mode you can adjust picture size with UP/DOWN button and move pic-
ture with UP/DOWN and LEFT/RIGHT button after pressing the MENU button.
In Waterglass mode, 16:9 signal will be displayed in 4:3 mode.
The Still button allows you to freeze the picture at anytime.
) button repeatedly, you can select one of the
CHILD LOCK
STILL
9
Menu
Picture
Sound
Clock
--:--
Timer
Wake up
Yes
Language
Time
00:05
Install
Prog.
Pr01
Adjust
Cursor
Return
M
Advertisement
Table of Contents
