Other Controls; Backlight; Blue Background; Software Upgrade - Toshiba 19DV501B Owner's Manual

Backlight

This setting controls the backlight level.
Select Backlight by pressing Up or Down button.
Press Left or Right button to set Backlight to Auto,
Medium, Maximum or Minimum.

Blue Background

If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
• In the Other Settings menu, select Blue
Background and choose On or Off using Left or
Right button.

Software Upgrade

This feature helps to keep your TV updated. It works
automatically and searches for new information
when available. Note that this setting is inactive to
be modifi ed.
To ensure that your TV always has the most updated
information, you can use this setting. In order for the
proper operation, please ensure that the TV is set to
standby mode.
You can enable or disable automatic upgrade by
setting Automatic Scanning option.
You can manually search for new software by
selecting Scan for upgrade.

Hard of Hearing

If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
• Use Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off.
19DV501B_DVD_A01_MB60_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1900UK)_10072930.indd 34 19DV501B_DVD_A01_MB60_[GB]_(01-TV)_(IB_INTERNET)_DVB-T_(1900UK)_10072930.indd 34

Other Controls

Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describing what is happening on the screen during the
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this
feature, only if the broadcaster supports that additional
narration track.
• Highlight
Down button.
• Press OK button to enter Audio Description
submenu.
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
You can set the timeout value of auto off feature.
After the timeout value is reached and the TV is not
operated for selected time, the TV will go off. Press
MENU button and select Settings by using Left or
Right button. Press OK button to continue. Use Up
or Down button to select Other Settings and then
press OK button. Select Auto TV Off using Up or
Down button.
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080p resolutions, Full Mode item will
be visible.
English - 34 -

Audio Description

Audio Description by pressing Up or

Auto TV Off

Standby Search (*)

Full Mode (optional)

03.10.2011 18:34:11 03.10.2011 18:34:11