Advertisement
WHAT TO DO...
When not operating for a long time
Remove the power supply cord.
Dry your refrigerator by opening the door for 2-3 days.
When you get ready to move
Securely fasten movable interior parts (or remove and pack them separately).
DO NOT lay down your refrigerator horizontally, or the compressor may be damaged.
Before you call for service, please check the following points first.
If the refrigerator is not operating:
Is the power supply cord unplugged?
Is the home fuse or circuit out of order?
If the refrigerator is warmer than usual:
Has the door been opened frequently or for a long period?
Are there any hot food or anything that has been stored without cooling?
Is the clearance between the refrigerator and the wall given sufficiently?
If there are unusual sounds:
Is the refrigerator placed on a levelled floor?
Are there any foreign objects behind the refrigerator?
Are dishes on refrigerator shelves vibrating?
CAUTION
Improper use of the grounding plug can result in electric shock. If a grounding adapter
is used, make sure the receptacle box is fully grounded.
POWER CORD REPLACEMENT
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a simmilary qualified person in order to avoid a hazard.
5
This refrigerator has been built with the door hinges on the right.
If you wish to change the opening direction, follow the instruction below.
- Unplug the refrigerator from its electrical outlet.
- Empty everything in the refrigerator, including shelves, foods, etc.
Changing Reversible Door
1
1. Remove COVER on the right top of the cabinet.
2. Remove three bolts that hold HINGE to the
cabinet.
3. Lift DOOR and place it on a padded surface to
prevent scratching it.
3
1. Remove two BOLTS from HINGE.
2. Take off HINGE from the cabinet.
3. Unscrew HINGE PIN and move to opposite
side.
4. Fasten it on the left bottom of the cabinet with
the three bolts previously removed.
2
1. Remove two bolts from HINGE on the right middle
of the cabinet and keep them for later use.
2. Remove HINGE.
3. Remove DOOR from the cabinet lifting up slightly.
4. Lift DOOR and place it on a padded surface to
prevent scratching it.
4
1. Remove screw from stopper at the bottom of
DOOR.
2. Take it off and rotate, transfer to the other side
and fasten with screw.
6
Advertisement
