Installation Preparation; Removing Freezer/Refrigerator Door; The Door, Follow These Steps - Daewoo FRS-T24DA Series User Manual

Installation Preparation

Check if the refrigerator can pass
a doorway or enter a door first.
Dimensions( including Door Handles)
FRS-T20 ***
(Width*Depth*Height)
FRS-T24 ***
(Width*Depth*Height)
Find a suitable place to install
Sufficient space from refrigerator back to the
wall for free air ventilation
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5 ), foods can be frozen or the refrigerator can work
in abnormal way.
942mm 803mm 1812mm
942mm 883mm 1812mm
Avoid direct sunlight.
16
If the refrigerator can not enter

the door, follow these steps.

Removing Freezer Door
Remove the bottom cover first. Unscrew top hinge cover with a
1 2
Pull out the left collar of the coupling
screw driver.
first, then hold the coupling and pull
Insert a thin screw driver into the
out the left water tube.
side groove of the cover to remove.
Lift up the front of hinge to remove.
4
Be careful not to damage the water
5
( After the hinge is removed the
line when removing the door.
door can fall down forward. Be
careful !)
!
@
Removing Refrigerator Door
1 Unscrew top hinge cover with a 2 Turn top hinge fastener
screw driver. counterclockwise 3~4 times.
Insert a thin screw driver into the Disconnect harness wires.
side groove of the cover to remove.
4 Lift the door straight up to remove.
!
!
@
@
Remove front bottom cover first, if it is attached.
3 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
!
!
@
Lift up the front of hinge to remove.
3
(After the hinge is removed the door
can fall down forward. Be careful !)
!
17
!