Temperature Control - Daewoo FRS-T24DA Series User Manual

Temperature Control

When this refrigerator is first plugged in, the temperature mode is set to [Middle].
Freezer Compartment
Push the FRZ SET. button and the setting
temperature changes as the figure shows.
>>> Sequential Temperature Change <<<
Faster Freezing...
When you want faster freezing, push the SUPER
FRZ. button, then QUICK icon turns on and the
mode starts. Just push the button once again when
you want to stop the mode.
The inside temperature can varies according to door
openings, amount of foods, surrounding temperature
etc.
The mode ends automatically and it returns to the
previously set mode.
For example) The refrigerator is working on [LOW Mode]. -->
[SUPER FRZ.] starts and ends. -->
Returns to [LOW Mode] again.
Optical Sensor
Refrigerator Compartment
Push the REF SET. button and the setting
temperature changes as the figure shows.
>>> Sequential Temperature Change <<<
Faster Cooling or
Refrigeration
When you want faster refrigerating, push the
SUPER REF. button, then QUICK icon turns on
and the mode starts. Just push the button once
again when you want to stop the mode.
The inside temperature can varies according to door
openings, amount of foods, surrounding temperature etc.
The mode ends automatically and it returns to the
previously set mode.
For example) The refrigerator is working on [LOW Mode]. -->
[SUPER REF.] starts and ends. --> Returns to
[LOW Mode] again.
Foods in the refrigerator can be frozen if the ambient
Notice
temperature of refrigerator is below 5 .
6
How To change lnterior Light Bulb
The lamp shall be replaced only by a service agent or similarly qualified person.
Change of Freezer Lights
Remove screw caps bottom Remove 2 screws of light
of light cover with cover.
a tiny tip screw driver.
Change of Refrigerator Lights
Refrigerator Top Lights
Remove screws of light
Remove screw caps
cover.
bottom of light cover with a
small tip screw driver.
Refrigerator Bottom Lights
Snap out hte bottom hook Hold down the light cover to
of light cover with a flat tip pull out.
screw driver.
Hold the bottom of light cover Change the light bulb.
and pull forward to remove. Follow the reverse order
of disassembing after
changing the light
Hold the bottom of cover and Change the light bulbs.
pull forward to remove. Follow the reverse order
of disassembing when
assembling back.
Change the light bulb .
Follow the reverse order after
changing the light.
7