Audio Setup - Go-Video DV1030A User Manual

AUDIO S
ETUP
To set the DVD+VCR to match the capabilities of your audio system:
While in Stop mode, press
1
[SETUP].
Selecting DIGITAL OUT.
2
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
• LPCM : The decoded audio signal goes to the digital audio
Select a Dynamic Range
3
You can set the Dynamic Range as
follows:
• Off : You can hear the sound as it was
• Full : You can hear loud sounds softer
48
recorded on the disc goes to the digital
audio output.
output.
originally recorded on the disc.
and soft sounds louder.
DIGITAL OUT BITSTREAM
DYNAMIC RANGE OFF
DIGITAL OUT BITSTREAM
DYNAMIC RANGE LPCM
DIGITAL OUT
DYNAMIC RANGE FULL
OFF