Audiovox AVP-7280 Operating Instructions Manual page 28

SYMPTOMS
Play mode indicated no audio or video to
TV. (continued from the previous page)
Poor video/snowy picture or lines on
screen.
CAUSE
• VCP connected by (75 OHM coax)
antenna coax to TV.
Set in "monitor mode".
• VCP connected to A/V output jacks.
(AVT-1400 or 1475)
• Output of VCP A/V RCA cables or coax
not connected to TV input.
• Switchable input device used between
TV and VCP (game prep).
• Poor connection between VCP output
and TV input.
• Reversed A/V inputs to TV.
• Shorted coax cable between VCP and TV.
• Dirty heads.
28
POSSIBLE SOLUTIONS
• Switch to TV mode.
• Change connections from A/V output
to A/V input.
• Check connector between VCP and
TV.
• Check connection(a).
• Check connection(b).
• Check cable/by pass or continuity test.
• Clean head using tape cartridge
cleaner. We recommend using
cartridge with cloth or paper tape and
cleaning drops included.
• These are readily available at retail
stores.