Audiovox AVP-7280 Operating Instructions Manual page 27
Dc operation w/specialized tape mechanism dlc coated video head backlighting of function buttons
Hide thumbs
Also See for AVP-7280:
- Operating instructions manual (30 pages) ,
- Operating instructions manual (30 pages)
Table of Contents
Advertisement
SYMPTOMS
No power.
No backlighting at power button.
Power indicated with backlighting-unit
will not operate.
More indicators flashing unit will not operate.
PLAY mode indicated no audio or video
to TV.
CAUSE
• Check CH Video Switch is in ON position.
• No 12V DC.
• Check circuit fuse at source of power (see
vehicle/converter manual).
• In-line fuse of power cord (in lighter plug).
• VCP (2 amp * 20X 5mm) fuse located on rear
of unit.
• Power cord unplugged from 12V outlet or at
rear of unit.
• (Unit in dew mode) Dew
• Retain power to player and allow unit for a
feature activated (see owner's
time to get rid of moisture. (After 30 minutes
manual).
if dew indicator is still on, completely switch
power off from unit and resupply after a
minute. This can reset dew indicator if
moisture eliminated.)
• No tape in unit.
• Insert the tape.
• Low voltage.
• Start the vehicle, if not running.
• Unit in emergency mode.
• Contact dealer for service to player.
• VCP connected to A/V Input jack,
• Switch TV to video mode with remote
RCA patch cables set in TV mode.
control or switch behind control door of TV.
27
POSSIBLE SOLUTIONS
Advertisement
Table of Contents
