Oven Control Functions - Frigidaire 316417134 Use & Care Manual

Es100 control with gas venturi burners & broiler drawer

Table of Contents

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1. Press

2. Within 5 seconds, press and hold the

To Set the Minute Timer:

1. Press

2. Press the

to increase the time in one minute increments. Press and hold the

minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you press the

3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in

seconds.

4. When the set time has run out, the timer will sound a 3 second beep. 0:00 will appear in the display until

pressed.

Note: While the minute timer is counting down, the ":" will flash. The minute timer does not start or stop cooking. It serves

as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during

any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in

the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the

To Cancel the Minute Timer before the set time has run out: Press

Changing the Temperature Display Mode (some models)

The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven tempertaures.

Note: Oven cooking temperatures may be set from 170°F to 550°F (77°C to 287°C).

To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing

the Temperature Display Mode):

1. Press & hold the

show the current Temperature Display Mode whether set for

2. Press the

key pad once to choose the (Fahrenheit) °F mode; or press the

(Celsius) °C mode.

3. After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once.

To complete the change skip step 4 below, OR;

4. If at any time during the process of changing the Temperature Display Mode

desired, press the

5. The control will beep once. The display will then return to the time of day with any temperature display mode change

you may have requested.