Connect the power cable as
shown
in
the
machine is designed for a single
phase voltage of 230V The power
supply requires only outlets of 13
A fuse and a double pole isolation
switch with at least 3 mm between
contacts.
INSTALLING THE MACHINE WITHOUT DRAWER
Lay the U base plate of the
machine on the shelf of the
cabinet.
Insert the L plates, compensating
for any space. The width of the
housing unit the coffee machine
depends on the thickness of the
cabinet's sides. six side plates
(four being 2 mm thick and two
1mm
thick)
76/209
figure.
This
are
provided
13A
to