Macro Controller Parameters - Native Instruments Reaktor Prism Manual

MC1/MC2 First Controller Modula­
tion List
Echo: Mix
Reverb: Size
5.3.3

Macro Controller Parameters

Fig. 5.3 Macro Controller section
▪ [1] SYNC: Tempo Sync—in this mode the LFO rate is rounded to a multiple of the global
tempo (in quarters/beats), and the phase of the LFO is synced to the song position.
▪ [2] LFO RATE: LFO frequency (Hz when
on).
▪ [3] PHASE: When SYNC
song position:
◦ -1: falling ramp on the beat grid
◦ -0.5: lower peak on the beat grid
◦ 0: rising ramp on the beat grid
◦ +0.5: upper peak on the beat grid
◦ +1: falling ramp on the beat grid
▪ [4] SYM: The symmetry of the two ramps of the triangle waveform can be set here. Posi­
tive values increase the speed of the rising ramp (to change the symmetry of the ramp,
drag your mouse holding the button and move across the
◦ +1: falling sawtooth
◦ 0: symmetric triangle
◦ -1: rising sawtooth
MC1/MC2 Second Controller Modu­
lation List
Echo: Hi Cut
Reverb: Mix
SYNC
is on, this parameter shifts the phase of the LFO in relation to the
MC1/MC2 Third Controller Modu­
lation List
Echo: FB
Master Mix
is off, multiples of the BPM when
SYM area.):
Overview of REAKTOR PRISM Ensemble
Macro Controller Section
SYNC is
REAKTOR PRISM - Manual - 22