Echo - Native Instruments Reaktor Prism Manual

▪ [2] RATE: Frequency (Hz) of the modulation LFO.
▪ [3] MIX: Crossfades between the dry signal and the delayed signal. At negative values
the delayed signal is inverted.
▪ [4] TIME: Delay time of the Flanger (in milliseconds). Longer times will result in a cho­
rus effect.
▪ [5] FB: Amount of feedback. At negative values the feedback is inverted and will em­
phasize other frequencies than in the non-inverted mode.
▪ [6] HI CUT: Cutoff frequency (in Hz) of the filter that damps the higher frequencies of
the delayed signal.
5.12.4

Echo

Echo is a tempo synchronizable stereo delay with high pass and low pass filters.
Echo Parameters
Fig. 5.15 Echo from the Effects section
[1] SYNC: Sets the adjustment of the mean delay time to tempo-synced values. When
is on, the value display will display the rate of the echoes as a multiple of the BPM tempo.
[2] TIME: Mean delay time. As there can be an offset between the left and right channel,
this control shows the mean value. When the
milliseconds, when it is on the value display shows the number of echoes per beat and the
delay can be set only to certain multiples of the beat time.
SYNC button is off the delay is adjustable in
Overview of REAKTOR PRISM Ensemble
Effects Section
SYNC
REAKTOR PRISM - Manual - 43