Effects Section; Cabinet - Native Instruments Reaktor Prism Manual

◦ Neutral at C3=60.
▪ [5] SUM: Master level (dB) of the mixer at the output of the synth. From here, the signal
is routed to the input of the effect chain, the Cabinet.
▪ [6] EXCITER: Crossfades between the signal of the Modal Bank (including the Voice De­
lay) and the Exciter signal.
▪ [7] DELAY: Crossfades between the signal from the Modal Bank and the signal from the
Voice Delay. At negative values the delayed signal is inverted. The mixed signal is only
used for the output mixer. The feedback path gets the pure delayed signal.
▪ [8] SAT: Crossfader for the source of the Delay signal. At the left end it's the output of
the Voice Delay, at the right end the output of the Saturator.
5.12

Effects Section

5.12.1

Cabinet

The Cabinet effect works as an amp/speaker simulator.
Cabinet Parameters
Fig. 5.12 Cabinet from the Effects section
▪ [1] DRIVE: Gain (dB) for the input signal. Higher gains will increase the amount of dis­
tortion/saturation.
Overview of REAKTOR PRISM Ensemble
Effects Section
REAKTOR PRISM - Manual - 40