Macro Controller Section - Native Instruments Reaktor Prism Manual

▪ [5] MODULATION ENVELOPE: Controls the modulation envelope for parameters set in the
Modulation Envelope Amounts Section.
Routing the Modulation envelope to Sum, can give you an overall envelope for the sound, cut­
ting out unwanted feedback decays or sharp attacks.
▪ [6] EXCITER: Contains controls for impulse and noise generation, as well as filters and
control for the feedback.
▪ [7] LFO: A polyphonic LFO providing cyclic change to two modulation targets choosable
from 26 sound parameters.
▪ [8] ENV AMOUNTS: Determines the amount parameters are modulated in, in relation to
the Modulation Envelope section [5].
▪ [9] MODAL BANK: A display visualizes the ratios and amplitude of the partials in the last
voice played. It is also possible to set the Modal Bank parameters for Ratios, Decays
and Amplitudes and to adjust the amount of Ring Modulation and 2nd-harmonic dis­
tortion in the Saturator.
▪ [10] VOICE PROCESSING: Set
comb filter for the feedback structure or the output. Mixer contains three crossfaders
to set the mix between the signals from the EXCITER, the
SATURATION stage.
▪ [11] EFFECTS CHAIN: The output of the mixer is processed by a chain of five effects.
▪ [12] METERS: The two Meters allow to monitor the output signal and the amount of sat­
uration in the Soft Clipper, which prevents hard clipping at the sound card.
5.3

Macro Controller Section

REAKTOR PRISM has two Modulation Macro Controllers. These are most conveniently
used with remote controllers, in a keyboard setting roughly corresponding to a volume or
expression pedal, and the modulation wheel. Both
to three parameters. They can be assigned to volume/expression pedals and/or the Mod
Wheel, or to other MIDI controllers, e.g., XY pads. But they can also be easily controlled by
sequencer automation curves. In addition, you can also assign the monophonic LFO as an
internal source of periodic movements.
DELAY and MIXER parameter levels.
MC1
Overview of REAKTOR PRISM Ensemble
DELAY may be used as a
MODAL BANK, the DELAY
and MC2 controllers can address up
REAKTOR PRISM - Manual - 19
Macro Controller Section
and the