Ableton Live; Logic; Cubase Sx / Nuendo - Native Instruments Reaktor Prism Manual

To hear sound from REAKTOR PRISM FX you must play notes via a MIDI instrument or toggle
notes on for at least one voice in the NOTES section. Please also check the THRESH (thresh­
old) level in the GATE section as a high THRESH level may also prevent the effect from being
heard. For more information please refer to the parameter descriptions above.
6.4.1

Ableton Live

In Ableton Live, insert the REAKTOR PRISM FX as an effect. Chose or create another MIDI
track. Click on the
MIDI To
was inserted. If there are more than one MIDI-enabled effects on the original track, you
must select the specific plug-in you want the MIDI to go to from the drop-down menu be­
low the selection. Make sure you are recording enabled on the new MIDI track, or
MIDI To
are using Monitor , to send the MIDI to REAKTOR PRISM FX.
In
Please refer to the documentation provided with Ableton Live for more information on setting
up MIDI for virtual instruments and effects. You may also find more support and information
specific to your scenario on the Native Instruments REAKTOR website forum.
6.4.2

Logic

In Logic, first insert the plug-in as an audio instrument from the track sub-menu called
. Use the side-chain menu in the plug-in window to choose an audio
MIDI-controlled Effects
track to route into REAKTOR PRISM FX. The MIDI will come from the sequences on the
audio instrument track (or live MIDI input if that track is selected in the Arrange window)
and the audio to be processed will come from the side-chain track.
Please refer to the documentation provided with Logic for more information on setting up
MIDI for virtual instruments and effects. You may also find more support and information spe­
cific to your scenario on the Native Instruments REAKTOR website forum.
6.4.3

Cubase SX / Nuendo

In Steinberg products, first insert REAKTOR PRISM FX as an effect and
TOR PRISM FX. Select the REAKTOR PRISM FX as the output device for one of your MIDI
tracks from the output device menu. The MIDI track will now send MIDI to REAKTOR
PRISM FX. To send MIDI, make sure the MIDI track is active, playing a clip or monitoring
MIDI in.
menu on the MIDI track and select the track where the effect
Overview of the REAKTOR PRISM FX Interface
Sending MIDI to REAKTOR PRISM FX
the REAK­
activate
REAKTOR PRISM - Manual - 56
AU