NEC Storage Manager Messages Handbook page 449

iSM13738: Target-control volume list data has
invalid data.
[Classification] ERROR
[Explanation] Target-control list contains invalid information.
[Measures] Create a target-control volume list again.
iSM13739: Control volume is not found.
[Classification] ERROR
[Explanation] Control volume is not found.
[Measures] Check that control volume definition file is described correctly, and then create a
target-control volume list again.
iSM13740: Failed to open control volume in
Diagnostic mode.
[Classification] ERROR
[Explanation] Control volume cannot be opened in Diagnostic mode.
[Measures] Check that LVM has not been activated on control volume or has not been
opened in Diagnostic mode by other application, and then retry command
execution.
Chapter 2 Message List
443