NEC Storage Manager Messages Handbook page 105

iSM07105: State of PD(<aa>h) has become
attn(powering up). (<bbb...b>
productID=<ccc...c> SN=<ddd...d>
No=<ee>h-<ff>h <ggg...g>)
[Classification] NOTICE
[Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is
starting up.
aa
bbb...b
ccc...c
ddd...d
ee-ff
ggg...g
[Measures] Unnecessary (It usually becomes ready within a few seconds. If the status does
not become ready, perform the appropriate maintenance because some trouble
may occur).
: Internal number indicating physical disk type
: Disk array name
: Product ID of disk array (S4300 Disk Array etc.)
: Serial number of disk array
: Physical disk number
: Information of RANK or pool where the physical disk belongs
- PoolNo=<xxxx>h PoolName=<yyy...y>
Indicates pool information. (for the disk arrays with pool)
xxxx : Pool number
yyy...y : Pool name
- RankNo=<xx>h-<yy>h
Indicates RANK information. (for other than the disk arrays
with pool)
xx-yy : RANK number
99
Chapter 2 Message List