NEC Storage Manager Messages Handbook page 503

iSM14434: Change data initialize time :
Time=<aa>, status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that logical disk initialization time was changed.
aa
bbb...b
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14435: Set LD reserve (optimization) :
LDN=<aaaa>h, <aaaa>h...,
status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that the logical disk was set to the work disk for optimization.
aaaa
bbb...b
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
: Initialization time
: Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
: Logical disk number
: Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
497
Chapter 2 Message List