NEC Storage Manager Messages Handbook page 243

iSM10331: command: <aaa...a>,
ATgroup(concentrator)=<bbbb>h
<ccc...c> [<ddd...d>],
status=failed(<ee>h/<ff>h/<gg>h)
[Classification] INFO
[Explanation] It indicates that access to the concentrator indicated by the concentrator number
failed (SCSI protocol failure).
aaa...a
bbbb
ccc...c
ddd...d
ee
ff
gg
[Measures] Check whether the disk array configuration is changed.
: Command name
: AT-group (concentrator) number
: Disk array name of AT-group (concentrator)
: Disk array name of AT-group (distributor) (Output if fixed)
: Sense key defined according to SCSI specification
: Additional sense code defined according to SCSI specification
: Additional sense code qualifier defined according to SCSI
specification
237
Chapter 2 Message List