NEC Storage Manager Messages Handbook page 247

iSM10402: link error:Disk Array=<aaa...a>,
linkno=<bbb...b>, portno=<ccc...c>,
state=<ddd...d>h
[Classification] WARNING
[Explanation] It indicates that a fault, freeze, or checking state has occurred in the link between
disk arrays.
For Windows, this message is target of ESMPRO Manager Report.
aaa...a
bbb...b
ccc...c
ddd...d
[Measures] After remove cause of an error, restore the system with reference to description
about replication-specific HW fault in the "Data Replication User's Manual
(Installation and Operation Guide for Windows)".
: Disk array name
: Link number of RemoteDataReplication
: Port number for link of RemoteDataReplication
: Error code
2: Fault (link fault)
3: Freeze (The disk array to be connected to is in stop or freeze
state.)
4: Checking (Temporary link communication fault has been
detected.)
*If the checking state continues, it changes to the fault state.
241
Chapter 2 Message List