Appendix A. Development Tools - NEC uPD75P308 Datasheet

APPENDIX A. DEVELOPMENT TOOLS

The following development support tools are readily available to support development of systems using
PD75P308:
PROM writing tools
*1
Hardare IE-75000-R
IE-75001-R
*2
IE-75000-R-EM
EP-75308GF-R
EV-9200G-80
PG-1500
PA-75P308GF
PA-75P308K
Software IE Control Program
PG-1500 Controller
RA75X Relocatable
Assembler
*1: Maintenance product
2: Not provided with IE-75001-R
3: Ver.5.00/5.00A has a task swap function, but this function cannot be used with this software.
Remarks: For development tools from other companies, refer to 75X Series Selection Guide (IF-151).
In-circuit emulator for 75K series
Emulation board for IE-75000-R and IE-75001-R
Emulation prove for PD75P308GF, provided with 80-pin conversion socket,
EV-9200G-80.
PROM programmer
PROM programmer adapter solely used for PD75P308GF. It is connected to
PG-1500.
PROM programmer adapter solely used for PD75P308K. It is connected to
PG-1500.
Host machine
TM
• PC-9800 series (MS-DOS Ver.3.30 to Ver.5.00A
TM TM
• IBM PC/AT (PC DOS Ver.3.1)
PD75P308
*3
)
31