Replacing The Optical Drive - Packard Bell EasyNote NS11HR Service Manual

Replacing the optical drive

46
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
1 black M2.5×6 (optical drive)
•
1 black M2×3 (optical drive bracket)
To replace the optical drive:
1
Complete the steps in
2
Complete the steps in
3
Remove the optical drive screw.
4
Use the non-marring plastic scribe to carefully push the optical drive out of
the drive bay (1), and then slide the drive out (2).
Non-marring plastic scribe
"Preparing the notebook" on page
"Removing the battery" on page
37.
38.