Packard Bell EasyNote NS11HR Service Manual page 30

Changing a password
24
CHAPTER 2: System utilities
3
Retype the password to verify the first entry, then press
You will be prompted to save the new password.
4
Enter
Press .
5
F10
Press to save the password and close the Setup Utility or you can
proceed to setting a user password.
To set a user password:
 
1
Press or to highlight
The Set User Password box opens.
2
Type a password, then press
3
Retype the password to verify the first entry, then press
You will be prompted to save the new password.
4
Press Enter .
5
Press F10 to save the password and close the Setup Utility.
To change a password:
 
1
Press or to highlight the
field, then press
The Set Supervisor Password or Set User Password box opens.
2
Type the current password, then press
3
Type a new password, then press
4
Retype the new password to verify the first entry, then press
You will be prompted to save the new password.
5
Press Enter .
6
Press F10 to save the password and close the Setup Utility or you can
proceed to setting a user password.
Set User Password
Enter
.
Set Supervisor Password
Enter
.
Enter
Enter
Enter
, then press
Enter
Set User Password
or
Enter
.
.
.
.
.
Enter
.