Battery; Hard Disk Drive 1 - Packard Bell EasyNote SL Disassembly Manual

44444

Battery

Perform the following steps to remove the battery:
1. Make sure the power is off.
2. Turn the notebook upside down.
Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to
the exterior of the notebook.
3. Slide the battery lock/unlock latch to the unlock position.
4. Slide and hold the battery release latch to the release position and, at the same time, lift the
battery upwards. There are three tabs holding the battery in place at the back (see
5. Take the battery out of the compartment (see

Hard Disk Drive 1

To remove the left hard disk drive, first remove the battery (see
perform the following steps:
1. Remove the screw securing the left hard disk drive compartment cover.
2. Lift the cover upwards from the left. There are two tabs holding the cover in place on the
right. Raise the cover until you can remove it from the casing (see
Fig. 1 Removing the battery.
Fig. 2 Removing hard disk drive compartment cover.
Packard Bell EasyNote SL Disassembly Manual
Fig. 1).
Battery on page 4) and then
Fig.
4
Fig. 1).
2).