Table of Contents
Advertisement
KX-TCD961CXB(38~46)
Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New
messages cannot be recorded when:
— "Memory full" is heard.
— The number of messages displayed on the base unit flashes rapidly.
— The ANSAGE indicator light flashes rapidly.
Erase some or all of the messages. We recommend you erase unnecessary messages after each
playback.
Erasing a specific message
Press
while the message you want
ERASE
to erase is being played.
The unit erases the message.
A short beep will sound and the unit will
continue to play the next message.
Recording a Memo Message
You can record a personal message in memory.
1
Press
A long beep sounds.
2
After the beep, talk clearly about 20 cm
away from the MIC.
The base unit display shows the elapsed
recording time.
40
99.12.3
2:18 PM
.
Page 40
Erasing all messages
All recorded messages, except the greeting
message, can be erased at one time.
1
Press
ERASE
"Press the same key again to erase all messages"
is heard.
2
Within 5 seconds, press
A long beep sounds and "No message" is
heard.
The base unit display shows " 0 ".
3
When finished, press
A beep sounds.
.
again.
ERASE
.
Advertisement
Table of Contents
