Table of Contents
Advertisement
Chapter
13
Fuel cost management
Using the "Gas Mileage"
function
Inputting the fuel consumption
information for calculating the
fuel cost
You can estimate the fuel cost to your destina-
tion by entering the fuel consumption informa-
tion in the navigation system.
= For details, refer to Setting a route to your
destination on page 48.
1
Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 28.
2
Touch [Gas Mileage].
The "Gas Mileage" screen appears.
3
Enter the fuel consumption informa-
tion.
Enter the following items:
! Surface Road:
Enter the fuel cost when you drive on ordin-
ary roads.
p How the fuel cost is entered depends on
the "Gas Unit" setting.
— When "Gas Unit" is set to "Gallon".
Enter how many miles (kilometers)
you get to a gallon.
— When "Gas Unit" is set to "Liter".
Enter how much fuel you need to tra-
vel 60 miles (100 kilometers).
! HWY Gas Mile:
Enter the fuel cost when you drive on the
freeway.
p How the fuel cost is entered depends on
the "Gas Unit" setting.
— When "Gas Unit" is set to "Gallon".
Enter how many miles (kilometers)
you get to a gallon.
— When "Gas Unit" is set to "Liter".
Enter how much fuel you need to tra-
vel 60 miles (100 kilometers).
! Gas Price/Unit:
Enter the fuel unit price.
74
En
! Gas Price:
= For details, refer to Calculating the fuel
consumption on this page.
! Gas Unit:
Set the fuel unit.
! Currency:
Set the unit of currency.
When all the items are entered, inputting the
fuel consumption information is complete.
Calculating the fuel consumption
When you enter the fueling information to the
navigation system, and export the data to SD
memory cards, you can check the fuel con-
sumption information by using the utility pro-
gram AVIC FEEDS, which is available
separately, on your PC.
p Up to 24 sets of data can be stored. You
can also export the data, as described
below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.
These calculations are based only on the infor-
mation that you provide and not on any data
from the vehicle. The fuel mileage displayed is
only a reference value, and does not guarantee
the fuel mileage displayed can be obtained.
1
Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 28.
2
Touch [Gas Mileage].
The "Gas Mileage" screen appears.
3
Touch [Gas Price].
The "Gas Price Calculation" screen appears.
Advertisement
Table of Contents
