Basic Operations Of The Audio Source; Switching The Audio Source; Turning Off The Audio Source - Pioneer CNSD-130FM Upgrade Instructions

Basic operations of the audio source

This chapter describes the basic operations of
the audio source.
You can play or use the following sources with
the navigation system.
! TUNER (FM, AM)
! CD
! ROM (MP3, AAC, WAV, WMA)
! USB
The following sources can be played back or
used by connecting an auxiliary device.
! XM (XM tuner)
! SIRIUS (SIRIUS tuner)
! "HD" (HD Radio tuner)
! iPod
! External unit 1 (EXT1)
! External unit 2 (EXT2)
! AUX (auxiliary device)

Switching the audio source

1 Press the MODE button when the map
of the current location is displayed.
The audio operation screen appears.
2 Press the SRC/OFF button repeatedly to
switch between the following sources.
XM (XM tuner) — SIRIUS (SIRIUS tuner) —
"HD" (HD Radio tuner)/TUNER (tuner) — CD
(built-in CD player) — USB (USB storage de-
vice)/iPod (iPod connected using USB input)
— EXT1 (external unit 1) — EXT2 (external
unit 2) — AUX (auxiliary device)
p In the following cases, the sound source
cannot to be used:
! When a unit corresponding to each
source is not connected to the naviga-
tion system.
! When no disc is set in the navigation
system.
! When "AUX" in the "Initial Setting"
screen is set to "Off".
= For details, refer to Switching the aux-
iliary setting on page 125.
p If the HD Radio tuner is connected to the
navigation system, "TUNER" is skipped in
the audio source selection.

Turning off the audio source

% Press and hold the SRC/OFF button
until the audio source turns off.
The audio source is switched off.
p To return to the display of each source,
press the SRC/OFF button.
Chapter
15
79
En