Pioneer DVR-645H-S Operating Instructions Manual page 62

DVR645H_WY_EN.book 62 ページ ２００６年７月５日 水曜日 午前１０時２５分
06
Recording
Using the recorder's internal tuner for
Pause Live TV
If you haven't connected to your TV using a
SCART cable (or your TV is not compatible
with AV Link) you can use the recorder's
internal tuner for the Pause Live TV.
1 Press HOME MENU.
2 Select 'Initial Setup' > 'Basic' > 'Pause
Live TV' > 'Recorder's Tuner'.
See Pause Live TV on page 133 to do this.
You can record the channel selected on the
recorder.
Using Pause Live TV
PAUSE LIVE TV
1 Start recording the current TV
channel.
Recording continues with playback paused.
• Note that it may take up to 10 seconds
for recording to start.
PLAY
2 Press to start playback.
You can also use the scan buttons (
), pause ( PAUSE ) and stop
( STOP )—all without affecting the
recording.
Operation table
TV/DVD
Viewing source mode of
TV built-in analog
tuner
TV built-in digital
tuner
External input of TV
DVR built-in analog
tuner
*1
No Chase Play! Warning if you change input this will stop the recording.
62
En
Pause Live TV
DVR source
function button
DVR
TV – Pause Live TV
Direct TV recording
TV –
Direct TV recording
TV –
Direct TV recording
DVD DVR built-in Pause Live TV
analog tuner
STOP REC
3 Press to stop the recording.
The operation is slightly different depending
on the viewing source. See the Operation
table below for details.
Tip
• When the Pause Live TV setting (see
page 133) is set to TV's Tuner , you can
press PAUSE LIVE TV while the recorder
is in standby to switch on and
immediately start recording. When set to
Recorder's Tuner , it is not possible to
use the Pause Live TV feature from
standby.
• After pressing PAUSE LIVE TV , it will
take at least 10 seconds for the picture to
change (during this time, all controls
except the power button are inoperative).
(Note that startup from standby is not
possible if you have selected Recorder's
Tuner in Pause Live TV on page 133.)
• Please note that you can't record from
another component (VCR, etc.) that is
connected by a SCART cable to the AV2/
(INPUT 1/DECODER) connector using
the Pause Live TV feature.
Condition
Preset channel of DVR and TV are
matched after downloading from TV
*1 Preset channel of DVR and TV are NOT
matched after downloading from TV.
Record TV program that you're watching.
*1 Preset channel info. in D.TV cannot be
shared by DVR even after Download from
TV. Record TV program that you're
watching.
*1 Record TV program that you're watching.