Using The Built-In Tv Tuner - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 58 ページ ２００６年７月５日 水曜日 午前１０時２５分
06
Recording

Using the built-in TV tuner

There are three different ways to select TV
channels. Note that you can't change the TV
channel during playback, recording or
during recording standby.
CHANNEL
+
CHANNEL +/– buttons
•
CHANNEL
–
REC MODE
AUDIO SUBTITLE ANGLE
PLAY MODE
• Number buttons
For example, to select channel 4, press 4
then ENTER ; for channel 34, press 3 , 4 ,
1
ENTER .
• CH +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the
broadcast or external input signal.
SHIFT AUDIO
• Press to change the audio
+
type.
The current audio channel is displayed on-
screen.
• If the NICAM audio setting (see NICAM
Select on page 136) is set to NICAM and
you are watching a NICAM broadcast,
you can switch between NICAM and
Regular (non-NICAM) audio.
Note
1 Channel presets are numbered 1 to 99.
58
En
NICAM
Regular
• If the NICAM broadcast is bilingual, you
can also select the language.
NICAM A NICAM B
Regular NICAM A+B
• You can also select the language for a
non-NICAM bilingual broadcast.
A (L) B (R)
A + B (L+R)
• When watching a recording made from
an external input with Bilingual
recording selected (see External Audio
on page 136), you can switch the audio
channel between left ( L ), right ( R ) or both
( L+R ).
L
L+R
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the LPCM
setting, only one channel of a bilingual
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Bilingual Recording setting (see
Bilingual Recording on page 136).
Switching between TV and DVD
When the recorder is stopped or recording
you can choose whether to have the audio/
video from the built-in TV tuner (or external
input) play on your TV ('DVD mode'), or
watch the channel that the TV is currently set
to ('TV mode').
R