Initialize Settings; Finalize Settings - Pioneer DVR-645H-S Operating Instructions Manual

DVR645H_WY_EN.book 126 ページ ２００６年７月５日 水曜日 午前１０時２５分
14
The Disc Setup menu
Set to On to prevent accidental recording,
editing or erasing of the disc loaded. If you
need to unlock the disc to make edits, select
Off .

Initialize settings

DVD-R DVD-RW DVD+RW DVD-RAM
You can initialize a recordable DVD-R/-RW
disc for either VR mode or Video mode
recording.
The first time you load a new DVD-RW disc,
it will be automatically initialized for
recording according to the DVD-RW Auto
Init. setting in the Initial Setup menu (see
page 140).
New DVD-R discs are ready for Video mode
recording when you load them, but it is also
possible to initialize them for VR mode
1
recording.
DVD+RW and DVD-RAM discs can also be
initialized as a way of erasing the entire disc.
When initializing a DVD-RAM disc, select VR
mode.
See Initializing recordable DVD discs on
page 70 for detailed instructions.
Note
1 Once initialized for VR mode recording it is not possible to re-initialize the disc for Video mode recording. Also,
once recorded in Video mode, the disc cannot be re-initialized for VR mode recording.
126
En

Finalize settings

Finalize
DVD-R DVD-RW DVD+R DVD+RW
Finalizing 'fixes' the recordings in place so
that the disc can be played on a regular DVD
player or computer equipped with a suitable
DVD-ROM drive.
It is also possible to finalize DVD+RW discs.
This is only necessary if you want to a player
to display a title menu for the disc.
See Playing your recordings on other DVD
players on page 68 for detailed instructions.
Undo Finalize
DVD-RW
You can undo the finalization on DVD-RW
discs recorded on this recorder in Video
mode. You need to do this if you want to
record more material or edit material already
on the disc.
You can also undo the finalization of VR
mode discs which have been finalized on
other DVD recorders. If when you load a disc
the message This disc cannot be recorded.
Undo the finalization is displayed, use this
command to be able to record on the disc
using this recorder.
HOME MENU
1 Select 'Disc Setup' from the
Home Menu.
ENTER
2 Select 'Finalize' > 'Undo
Finalize' then 'Start'.