Pioneer DVR-645H-S Operating Instructions Manual page 152

DVR645H_WY_EN.book 152 ページ ２００６年７月５日 水曜日 午前１０時２５分
17
Additional information
Problem
The picture freezes and
the front panel and
remote control buttons
stop working
A device connected via
USB does to function.
DVR-645H-S only
HDMI
Problem
The connected HDMI or
DVI device does not
display any picture
(and the front panel
HDMI indicator does
not light)
152
En
Remedy
• Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
power switches off.
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
Remedy
• Try disconnecting then reconnecting the HDMI cable (while the
power of both components is on).
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next,
switch on the HDMI/DVI device and leave it for around 30 seconds,
then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the
following:
– The connected device's video input is set correctly for this unit.
– The cable you're using is fully HDMI-compliant. Using a non-
standard cable may result in no picture being output.
– Don't use several HDMI cables connected together. Use a single
cable to connect devices together.
• When you connect a DVI-compatible device make sure of the
following:
– The connected device's video input is set correctly for this unit.
– The DVI terminal on the connected device is HDCP-compatible.
– The connected device is compatible with NTSC (720 x 480i/p, 1280 x
720p, 1920 x 1080i) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i)
video input.
• If the recorder's internal HDD is damaged or broken, there will be no
HDMI output.
• Not all HDCP-compatible DVI devices will work with this recorder.
STANDBY/ON for 5 seconds until the