Table of Contents
Advertisement
6
System
6.10 Anynet+(HDMI-CEC)
m
MENU
[
6.10.1 Anynet+(HDMI-CEC)
What is Anynet+?
Anynet+
is a function that enables you to control all connected Samsung devices that support
with your Samsung product remote. The
have the
Anynet+
logo on it.
You can only control Anynet+ devices using the product remote control, not the buttons on the
product.
The product remote control may not work under certain conditions. If this occurs, reselect the
Anynet+ device.
The Anynet+ functions do not operate with other manufacturers' products.
For instructions explaining how to connect Anynet+ external devices, refer to the device's user
manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.
It does not work if the AV device is connected as a secondary display.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the
same type.
However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home
Theate, connect the Home Theater to the product using an HDMI cable then.
]
System
Anynet+(HDMI-CEC)
Anynet+
feature. To be sure your Samsung device has this feature, check if there is an
[
]
ENTER
system can be used only with Samsung devices that
Anynet+
Anynet+
83
6 System
Advertisement
Table of Contents
