Table of Contents
Advertisement
5
Using the Channel Menu
5.1
Channel
m
MENU
[
This option is available when the input source is TV.
5.1.1 Antenna (Air/Cable)
m
MENU
[
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the LED display.
Air
/
Cable
5.1.2 Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable
system and adds them to the Channel List.
To start
Auto
Program, follow these steps:
1
Push
Source screen appears.
2
On the Antenna Source screen, select the source of your product signal.
]
Channel
ENTER
Channel
Antenna
Auto Program
Clear Scrambled Channel
Fine Tune
The displayed image may differ depending on the model.
]
Channel
Antenna
m
MENU
[
]
Channel
Air: If your product is connected to an antenna choose Air, and then press
product will automatically start memorizing channels.
Cable: If your product is connected to a cable outlet, choose Cable, and then press
[
] . Go to Step 3.
[
]
Cable
[
]
ENTER
Auto Program
ENTER
[
] on your remote. The Antenna
[
ENTER
5 Using the Channel Menu
] . The
ENTER
67
Advertisement
Table of Contents
